2-Port Serial Device Server MX3220 Series

2-Port Serial Device Server

◆Auto-detecting 10/100 Mbps Ethernet

◆Built-in 15 KV ESD protection for all serial signals.

◆Supports various operation mode: COM port redirector (Virtual COM port).

◆Versatile socket operation modes: TCP Server, TCP Client, UDP, and Ethernet Modem

◆Supports multi-access features: allows maximum of six hosts to access one serial port simultaneously

◆Support to auto recovery after power and network break

◆Support to monitor the status.It can monitor the each orifice receives and dispatches through the website

◆Pair Connection mode for connecting two serial devices over a network without a PC

◆Supports DNS（TCP Client Only）

◆Supports SNMP MIB-II for network management

◆Configuration via web/Telnet/serial console

◆The network of the enhancement installs setup and IP/MAC to filter rule and assure your arrangement and network stability

◆Provide a convenient firmware to upgrade, assure to continuously promote product performance and reliability

 Product Description

MX3220 serial device server (brief name: serial device server) is the independent development networking product of our company about RS-232/485/422 serial orifice terminal equipment.

The MX3220 series product adopts 32bit ARM MCU and combines efficiently embedded system and make equipment run more safe and stable

The MX3220 series serial device server none needs heavy investment to replace or upgrade.

It can let the original RS-232/485/422 serial industry control equipment immediately have a network to unite capability with each other, provide efficient, safe, stable data gateway for the serial orifice data information.

The MX3220 series product was applied to communication and control realm extensively, such as electric power supervision, engine room supervision, PLC, intelligence electric meter, gas meter and biological recognition device and reader...etc.,

It is the connectivity bridge between serial orifice equipment and TCP/IP Ether network.

 Specifications

LAN

Ethernet: 10/100 Mbps auto sensing

No. of Ports: 2

Port Connector: RJ45

Protection: Built-in 1.5 KV magnetic isolation

Serial Interface

Interface：2-port RS-232/422/485(software selectable)

Port Type：Male DB9 or Terminal

RS-232 Signals：TXD, RXD, RTS, CTS, DTR, DSR,

DCD, GND

RS-422 Signals：TX+, TX-, RX+, RX-, GND

RS-485 Signals：RS485+, RS485-, GND

Protection: 400W TVS protection

Serial Communication Parameters:

Parity：None, Even, Odd

Data Bits：5, 6, 7, 8，9

Software Features

Protocols：ICMP, IP, TCP, UDP, DHCP, Telnet, SNMP, HTTP

Utilities：Supports Windows 2000/XP/2003/Vista(32bit)

OS Drivers Support：Real COM drivers for Windows

Windows 2000/XP/2003

Configurations：Web interface, Windows utility, Telnet console

Power Requirements

Power Input：9-40 VDC

Power Consumption：0.12A@9V   

Mechanical

Material：Aluminum case (1 mm)

Dimensions： 76*53*22mm（L*W*H）

Environment

Operation Temperature：-10-60˚C

Storage Temperature：-20-85˚C (-4-185˚F)

Operating Humidity：5-95%RH  

Warranty：2 years

 Structure

 Model